Delay
121
DME32—Owner’s Manual
Setting the Delay Scale
In addition to milliseconds, delay times can also be specified in samples, meters, feet,
timecode frames, or beats per minute.
1
Click the DELAY SCALE button on a Delay control window.
The Delay Scale window shown below appears.
“FS” indicates the selected wordclock frequency. “340 m/s” and “1,115.5 ft/s” are the
speed of sound in meters and feet respectively (air temperature = 14˚C, 57.2˚F).
2
Select the desired units.
For TC Frames, you must also select a frame rate: 30ND, 30DF, 29.27ND, 29.97DF, 25,
or 24. For Beats, you must also set a tempo: 20 to 300.
3
Click OK to save your settings, or click Cancel to leave them unchanged.
Delay
LEVEL
–Infinity dB to 0.0 dB
Adjusts the signal level of each output
ms
0.0–1200.0 ms
Sets the delay time in milliseconds (linked
to control below)
Sample
1
See “Setting the
Delay Scale” below
Sets the delay time in the units chosen on
the Delay Scale window (linked to ms con-
trol)
MUTE
ON/OFF
Mutes each output
ON/OFF
ON/OFF
Turns each delay on and off
1. This control’s label depends on the Delay Scale setting.
Units
FS = 48 KHz
FS = 44.1 kHz
Samples
0.0–57600 samples
0.0–52920 samples
Meters
0.0–408.0 meters
Feet
0.0–1338.6 feet
TC Frames
30ND, 30DF,
29.27ND, 29.97DF
0.0–35.96 frames
25
0.0–30.0 frames
24
0.0–28.8 frames
Beats
(20–300 bpm)
20 bpm
0.000–4.000
300 bpm
0.000–60.00
Section Parameter
Range
Description