200
Chapter 10—Front Panel Operation
DME32—Owner’s Manual
Recalling Scenes
Scenes can be recalled from the DME32 front panel as follows.
1
Use the number keypad to enter a scene memory number.
The number of the specified scene memory flashes on the SCENE NO. display and the
scene title appears on the main display, as shown in the following example.
If the specified memory does not contain a scene, “NO DATA” appears.
To cancel the Recall function and stop the scene memory number flashing, enter the
previous scene number.
2
Press the [RECALL] button.
The specified scene is recalled, the number on the SCENE NO. display stops flashing,
the scene edit dots go out, and the VALUE section of the display is updated accordingly,
as shown in the following example.
In a multiple-unit system, the specified scene is recalled on all DME32s via the cascade
connections.
Note: When recalling a scene, be aware that volume levels may change abruptly as param-
eters change—nobody likes sudden loud noises, or worse, speaker damage.
SCENE NO.
CONFIGURATION
SCENE
Setup
X
A
X
Female Chorus
03
SCENE NO.
CONFIGURATION
SCENE
8Ch
X
Aut
X
MASTER
XXXXXX
0dB
Setup
X
A
X
Female Chorus
03
