Linking Component Parameters
79
DME32—Owner’s Manual
3
Select a component from the Components list.
The parameters for that component appear in the Parameters section.
Router component buttons cannot be linked.
4
Select a parameter.
5
Click Add to add the selected parameter to the group.
The parameter appears in the Linked Parameters section.
Up to 16 parameters can be added to each group.
6
To remove a parameter, select it from the Linked parameters list, and then
click Remove.
7
Make the required settings and then click OK to save your settings, or click
Cancel to leave them unchanged.
The Link Group Edit window closes (the Parameter Link window is still open).
8
When you’ve finished editing the groups, click Apply to save your settings and
leave the Parameter Link window open, click OK to save your settings and
close the window, or click Cancel to leave the settings unchanged and close
the window.
The Parameter Link window closes.
Using the Apply button instead of the OK button is convenient when working offline,
as it allows you to edit and view parameter link settings for each scene without having
to keep opening and closing the Parameter Link window.
You must compile and transfer the configuration to the DME32 for the parameter links
to take effect. See “How to Build & Edit Configurations” on page 44 for more informa-
tion.
