Yamaha CL5, Reference Manual

Page: 197 / 306

Setup
194 Reference Manual
USER SETUP window
8
1
3
4
5
1
CH OPERATION
•
WITH SEND ........................ Restricts operation of that channel's send parameters.
(From MIX, From MATRIX)
•
DCA MASTER .................... Restricts operation of that channel's DCA group fader,
ON/OFF, and ICON/COLOR/NAME.
•
DCA GROUP ASSIGN ........ Restricts changes of assignment to that DCA group.
•
SET BY SEL ....................... If this button is on, you can press the panel [SEL] key of
a channel to enable or disable the above-mentioned
operating restrictions for that channel.
2
CURRENT SCENE
Specifies the operations that can be performed on the current scene memory.
2
•
INPUT PATCH/NAME ......... Restricts operations for input channel patching and
names.
•
OUTPUT PATCH/NAME ..... Restricts operations for output channel patching and
names.
•
BUS SETUP ....................... Restricts operations for bus setup.
• GEQ RACK/EFFECT RACK/PREMIUM RACK
6
..................... Restricts operations for the racks. Press this area to open
the RACK USER LEVEL window, in which you can set
this restriction.
7
However, there will be no restriction on operating the
MIDI CLK button displayed for delay-type and
modulation-type effects, or the PLAY/REC button
displayed for the FREEZE effect.
• MUTE GROUP ASSIGN/MASTER
..................... Operations for mute group assignment and mute group
Here you can specify (for each channel) the operations that will be permitted for input
channels, output channels, and DCA groups. The settings will apply to the currently-
NOTE
master will be restricted.
selected channel. Settings for currently-selected channels will be displayed below the
CH OPERATION section. Use the panel [SEL] keys or the Selected Channel field in the
Function Access Area to select the channel for which you want to make settings.
The type of buttons shown will depend on the selected channel or group.
•
INPUT channel ................... [HA], [PROCESSING], [FADER/ON]
•
MIX/MATRIX channel ......... [WITH SEND], [PROCESSING], [FADER/ON]
• STEREO/MONO channel
......................... ............ [PROCESSING], [FADER/ON]
•
DCA group ......................... [DCA MASTER], [DCA GROUP ASSIGN]
•
HA ....................................... Restricts operation of the HA (Head Amp) patched to that
channel.
•
PROCESSING .................... Restricts operation of all signal processing parameters
for that channel (excluding the fader, [ON] key, and send
level).
•
FADER/ON .......................... Restricts operation of that channel's fader, [ON] key, and
send level.
In the case of the CL3/CL1, faders that do not exist on those models will not be shown.
3
SCENE LIST
Specifies the operations that can be performed on scene memories.
• STORE/SORT operations
• RECALL operations
4
LIBRARY LIST
Specifies the operations that can be performed on libraries.
• STORE/CLEAR operations
• RECALL operations
USO
RESTRITO