Xylem Aquavar, Instruction Manual

Page: 123 / 172

Option Function
[193] Sleep Mode
[194] Broken Belt
[195] Bypass Valve Control
[196] Fire Mode
[197] Fire Mode was Act.
[198] Drive Bypass
[211] Lead Pump Alternate1
[212] Fixed Speed Pump 1
[213] Fixed Speed Pump 2
Analog Output
The analog output (AO 42, parameter 6–50) can be configured to output various
controller parameters. This output is a current output (0–20mA or 4–20mA). Refer to the
Common Terminal Wiring section in this manual for details on wiring. The list of analog
output configuration options is shown below.
Option Function
[0]* No operation
[100] Output freq. 0–100 0–100 Hz, (0–20 mA)
[101] Reference Min-Max Minimum reference — Maximum
Reference, (0–20 mA)
[102] Fe–200% –200% to +200% of [20–14]
Maximum Reference/Feedb. , (0–20
mA)
[104] Torque 0–Tlim 0–Torque limit ( [4–16] Torque Limit
Motor Mode ), (0–20 mA)
[105] Torque 0–Tnom 0–Motor rated torque, (0–20 mA)
[106] Power 0–Pnom 0–Motor rated power, (0–20 mA)
[107]* Speed 0–HighLim 0–Speed High Limit ( [4–13] Motor
Speed Limit [RPM] and [4–14] Motor
Speed High Limit [Hz] ), (0–20 mA)
[113] Ext. Closed Loop 1 0–100%, (0–20 mA)
[114] Ext. Closed Loop 2 0–100%, (0–20 mA)
[115] Ext. Closed Loop 3 0–100%, (0–20 mA)
[130] Out frq 0–100 4–20mA 0–100 Hz
[131] Reference 4–20mA Minimum Reference — Maximum
Reference
[132] Feedback 4–20mA –200% to +200% of [20–14]
Maximum Reference/Feedb.
[133] Motor cur. 4–20 mA 0–Inverter Max. Current ( [16–37] Inv.
Max. Current )
[134] Torq.0–lim 4–20 mA 0–Torque limit ( [4–16] Torque Limit
Motor Mode )
[135] Torq.0–nom 4–20 mA 0–Motor rated torque
[136] Power 4–20 mA 0–Motor rated power
[137] Speed 4–20 mA 0–Speed High Limit ([4–13] and [4–
14])
[139] Bus ctrl. 0–100%, (0–20 mA)
[140] Bus ctrl. 4–20 mA 0–100%
6 Operation
Aquavar ® Intelligent Pump Controller - 150 HP to 600 HP INSTRUCTION MANUAL 121