Xtralis HeiTel CamDisc HNVR, Product Manual

Page: 56 / 68

CamDisc HNVR Product Guide HeiTel by Xtralis
56 26419_04
Live video settings Conditional refresh:
On=activated
With installed HYBRID Card 4 and at least one activated analogue video
channel:
Live transmission quality=720 * 288 +;
Live quality for multi view:
Groups=512 * 256 +; Quad=512 * 256 +; Ten=256 * 128;
E-Mail Send email in case of alarm=not activated;
Send email in case of picture warning threshold reached=not activated;
All other fields and options: not defined or not activated
HTconnect Port=3333, IP address 1 to IP address 5=not defined
Camera-specific Settings
Camera settings For all cameras:
Camera= activated; Camera name="Camera 1", "Camera 2", etc.; With
installed HYBRID Card 4 and at least one activated analogue video
channel: Brightness=100; Contrast=100; Colour=on
Camera groups For all camera groups: Group names="Group 1", "Group 2", etc.;
no camera assigned to any group
Motion detection zones With installed HYBRID Card 4 and at least one activated analogue video
channel:
Enabled=not activated;
Detection zones= all active (only visible on activation of motion fields for the
corresponding camera)
Privacy zones With installed HYBRID Card 4 and at least one activated analogue video
channel:
Privacy zones=not defined
Alarm
Alarm inputs Arm / Disarm input:
Triggered manually or by software=not activated;
Triggered by input=activated;
Connect= not activated;
active if= Normally closed (high active)
Alarm input:
Connect= activated;
active if= control input closed (low active)
Alarm only when trigger level stable for x s=Off
Camera control inputs For all cameras:
Trigger level=Normally opened; Mode=Off;
Time interval for Entry/Exit mode=10 s; Linked with Motion=not activated
Motion With installed HYBRID Card 4 and at least one activated analogue video
channel:
For all cameras:
Motion alarm enabled=not activated; Sensitivity=– Motion
Video loss For all cameras:
Connect=not activated