Xtralis HeiTel CamDisc HNVR, Product Manual

Page: 19 / 68

HeiTel by Xtralis CamDisc HNVR Product Guide
26419_04 19
Pin Labeling/description Type Function
18 12V DC + Power, + Supply voltage is nominal 12V DC (Voltage input from 8-16
V DC). Only connect the device to your local power supply
system using the provided power supply unit with the
prepared connection cable. Only use the power supply
cable matching your grid (Euro/UK).
19 12V DC Power,
ground
20 R1 [Common] Relay Device configuration allows you to allocate the following
functions to any relay:
l
Manual remote control with CamControl LITE,
CamControl PRO or CamControl CLIENT
distinguishing between switch and pushbutton
functions
l
Switching to at least one CamControl receiver unit
with active online connection
l
Error relay
21 R1 [normally open] Relay
22 R1 [normally closed] Relay
23 R2 [Common] Relay
24 R2 [normally open] Relay
25 R2 [normally closed] Relay
26 Aux in2 Control input Auxiliary input 2: Reserved.
27 Ground Common ground for all inputs of type "control input".
28 to
32 Control in 6-10 Control input Camera control inputs for external contact triggered
recording and/or selective dialup to a CamControl receiver
unit for video inputs 6 to 10. These control inputs can be
used for event recording as well as for event optimised
continuous recording.
33 S Audio You can connect a 1 W/8 Ohm loudspeaker on this output
to listen to the audio on the property being monitored.
The output is protected against overload, but not against
shorts. Using a speaker with matching maximum output is
recommended.
34 Speaker – Audio