Xtralis HeiTel CamDisc HNVR, Product Manual

Page: 51 / 68

HeiTel by Xtralis CamDisc HNVR Product Guide
26419_04 51
7 CamDisc HNVR Technical Data
Function Description
Video
Video standard Digital: Dependent on IP camera;
Analogue(only with HYBRID Card 4): CCIR/PAL, EIA/NTSC
Video compression Device internal using HTcompress (M-JPEG differential compression
with adjustable compression factor per camera) or H.264 (with selected
cameras)
Picture formats
l
Depending on IP camera model: from standard to megapixel;
l
With analogue camera: Transmission: 720 x 288, 512 x 256,
256 x 128, 128 x 80 pixels and 16 Bit colour depth
l
Recording: 720 x 288, 512 x 256 pixels and 16 Bit colour depth
Video inputs Up to 10 IP cameras, simultaneous use of different models and
resolutions; up to 8 analogue cameras using up to 2 HYBRID Card 4
(4 x composite input, 1 Vss/75 Ohm)
Audio
General Bidirectional audio transmission and recording
Audio compression SPEEX Codec, 16Bit, 80-8000 Hz
Audio inputs 1 x line in (0-2 Vpp, nominal 0.775 Vpp) or
Mic in (electret or electrostatic microphone)
Audio outputs 1 x line out (0-2 Vpp, nominal 0.775 Vpp)
and 1 speaker out (1 Watt/8 Ohm)
Transmission and Recording
General Video and audio transmission, recording and playback at the same time;
online evaluation via local and remote receiver station or offline via
removable HDD
Multi-Unicast Up to 6 IP- or 5 IP- and 1 dial-up connection simultaneously
Web Server Up to 4 IP connections via PC, Smartphone, PDA browser (additional to
5 standard connections)
Video transmission of Live and
recorded images Up to real-time via IP (LAN/WLAN, Internet, DSL, GPRS, HSDPA,
CDMA, UMTS, EDGE) and dial-up (PSTN/POTS, ISDN)
Recording speed Up to 25 resp. 30 fps per camera (250 resp. 300 fps in total) at 720 x 576
(PAL) resp. 720 x 480 (NTSC) Pixel; generally dependant on
compresssion mode, image content and Bit rate
Recording media Removable SATA drive (1, 2 or 4 TB) with adaptive track management
Trigger to initiate transmission/
recording Dry contact, built-in motion detection, serial command, integrated motion
detection and timer based calender
Recording modes Image sequence, up to 50,000 events per camera with pre- and post
alarm, continuous recording, all modes in conjunction with built-in timer
based calender
Recording interval Event recording: intervall=0-999s and duration= 1-999s separately
adjustable for pre- and post alarm; continious recording: intervall=0-999s
timer controlled (event optimised recording possible) (value “0”= as fast
as possible)
Callback Automatic callback to pre-programmed receiver stations with
CamControl software