Xtralis HeiTel CamDisc HNVR, Product Manual

Page: 45 / 68

HeiTel by Xtralis CamDisc HNVR Product Guide
26419_04 45
Logfile entry Description Optional Error relay
[D&T], Login failed,
[u], [v], [w], [y] The user indicated in field [u] tried to establish a
connection with log in order indicated in field [w]
to CamDisc HNVR (0=first, 1=second, etc.).
This attempt failed due to unknown user and/or
wrong password. Depending on connection mode
and configuration, the following additional
information can be displayed.
Field [v] = connection established by:
l
IM = internal Modem (ISDN Card)
l
EM = external Modem (or other dial up
devices)
l
NET = Network
Field [y] = Connection cause:
l
R = Receiver dialup
l
A = Alarm call triggered by CamDisc HNVR
l
S = Service call triggered by CamDisc
HNVR(every 24 hours)
no no
Status messages to the 24 pin terminal block
[D&T], Control input
[x] closed The control input indicated in field [x] has been
closed. yes no
D&T], Control input
[x] opened The control input indicated in field [x] has been
opened. yes no
[D&T], control input
[x] sabotaged The control input indication in field [x] has been
sabotaged. yes no
[D&T], control input
[x] alarmed The control input indication in field [x] has been
alarmed. yes no
[D&T], control input
[x] secured The control input indication in field [x] has been
secured. yes no
[D&T], Alarm input
closed The alarm input has been closed. yes no
[D&T], Alarm input
opened The alarm input has been opened. yes no
[D&T], Alarm input
sabotaged The alarm input has been sabotaged. yes no
[D&T], Alarm input
alarmed The alarm input has been alarmed. yes no
[D&T], Alarm input
secured The alarm input has been secured. yes no
[D&T], Alarm enable
input closed The arm/disarm input has been closed. yes no
[D&T], Alarm enable
input opened The arm/disarm input has been opened. yes no
[D&T], Alarm enable
input sabotaged The arm/disarm input has been sabotaged. yes no
[D&T], Alarm enable
input alarmed The arm/disarm input has been alarmed. yes no