Xtralis HeiTel CamDisc HNVR, Product Manual

Page: 43 / 68

HeiTel by Xtralis CamDisc HNVR Product Guide
26419_04 43
Logfile entry Description Optional Error relay
[D&T], Alarmcall
failed: [x], AR:[y] Alarm connection to receiver with telephone
number / IP address indicated in filed [x] could
not be established. Field [y] indicates the alarm
reason (AR):
Possible values for [y]:
Control input, camera 1 - 10: 01 - 10
Sabotage alarm - general alarm input: 11
Sabotage alarm - enable/disable
status input: 12
Sabotage alarm - sabotage-status
input: 13
General alarm: 17
Panic alarm (Tamper): 24
Device reboot (Power on): 25
Motion alarm, camera 1 - 10: 31 - 40
Video loss, camera 1 - 10: 41 - 50
Alarm released by serial command,
camera 1 - 10: 51 - 60
Camera position authentication,
camera 1 - 10: 71 - 80
Alarm panel triggered alarm camera 1
- 10: 81 - 90
Alarm triggered by picture warning
threshold (disk full) for event recording
camera 1 - 10: 91 - 100
Alarm triggered by picture warning
threshold (disk full) for continuous
recording camera 1 - 10: 101 - 110
Tamper alarm camera 1 - 10: 111 -120
PIR alarm camera 1 - 10: 121 - 130
Tamper alarm (PIR) camera 1 - 10: 131 - 140
IntrusionTrace alarm camera 1 - 10: 141 - 150
no yes
[D&T], Caller, [x],
[y] Caller indicates the log in the order of the last
login (0=one, 1=two etc.). Field [x] and field [y]
indicates telephone number / IP address. yes no
[D&T], Service Call,
[x] The device triggered a service call to telephone
number / IP Address in field [x]. no no