Xtralis HeiTel CamDisc HNVR, Product Manual

Page: 47 / 68

HeiTel by Xtralis CamDisc HNVR Product Guide
26419_04 47
6 Web Server
With firmware version 1.30 or higher, CamDisc HNVR devices have an integrated Web Server for
transmitting live images and, if necessary, controlling PTZ functions. If you select this option (Recorder
settings/Connections/ Network (TCP/IP)/Web Server) one of these six standard connections is dropped in
favour of up to four additional connections to PC, PDA or Smartphone browsers.
General
When a user is working with the Web Server, then for security reasons a session is started and the Web
browser saves a cookie on the relevant user's computer. Within one session a user has up to ten minutes to
carry out an action (e.g., switch camera or quality / change live image viewing mode). Every action carried out
within this period of time resets the session time so that the overall 10-minute period is renewed for each
action. When this period of time expires, the session ends. The user is logged off and the logon page opens.
If transmitter configuration is changed using CamControl LITE or CamControl PRO the Web Server is reset. If
there are any active Web browser connections at the time, then the following happens:
l
No user defined in the transmitter: Reset to live image of Camera 1 in Mainscreen viewing mode
l
At least one user defined in the transmitter: Reset to logon page
Establishing a connection
To establish a connection to the server, enter the symbolic name (e.g. http://webserver1.heitel.com) or the IP
address (e.g. http://62.214.6.12) of the device in the address bar of the Web browser.
Login
.
The login page only opens if at least one user has been defined in the transmitter. If there is no user entry, the
Mainscreen viewing mode opens directly. Otherwise, you will be asked to enter your Username and
Password in order to access the device.
When entering your username, make sure to differentiate between lower- and uppercase letters because it is
case sensitive. Enter the relevant password and click Login.