Xtralis HeiTel CamDisc HNVR, Product Manual

Page: 46 / 68

CamDisc HNVR Product Guide HeiTel by Xtralis
46 26419_04
Logfile entry Description Optional Error relay
[D&T], Alarm enable
input secured The arm/disarm input has been secured yes no
[D&T], Aux input [x]
closed The Aux input indicated in field [x] has been
closed. yes no
[D&T], Aux input [x]
opened The Aux input indicated in field [x] has been
opened. yes no
[D&T], Aux input [x]
sabotaged The Aux input indication in field [x] has been
sabotaged yes no
[D&T], Aux input [x]
alarmed The Aux input indication in field [x] has been
alarmed yes no
[D&T], Aux input [x]
secured The Aux input indication in field [x] has been
secured yes no
[D&T], V.out input
closed The control output V.out has been closed. yes no
[D&T], V.out input
opened The control output V.out has been opened. yes no
Status messages to the serial control
[D&T], External
input [x] (cam [y])
sabotaged The External input indication in field [x] with the
corresponding camera [y] has been sabotaged yes no
[D&T], External
input [x] (cam [y])
alarmed The External input indication in field [x] with the
corresponding camera [y] has been alarmed yes no
[D&T], External
input [x] (cam [y])
secured The External input indication in field [x] with the
corresponding camera [y] has been secured yes no
[D&T], External
command:
XXXX,OK The serial command XXXX was successfully
processed (XXXX = four-digit command). yes no
[D&T], External
command:
XXXX,ERROR The serial command XXXX was not successfully
processed (XXXX = four-digit command). yes no
Status messages for CI Adapter/CIO Adapter
[D&T], External
input: xx (cam: yy)
closed Input for the CI Adapter/CIO Adapter has been
closed.
l
xx= Input for the CI Adapter/CIO Adapter (01
- 50)
l
yy= Camera number configured in the sender
setup at the time the camera is triggered (01 -
10)
yes no
[D&T], External
input: xx (cam: yy)
opened Input for the CI Adapter/CIO Adapter has been
opened.
l
xx= Input for the CI Adapter/CIO Adapter (01
- 50)
l
yy= Camera number configured in the
transmitter set-up at the time the camera is
triggered (01 - 10)
yes no