Xtralis HeiTel CamDisc HNVR, Product Manual

Page: 44 / 68

CamDisc HNVR Product Guide HeiTel by Xtralis
44 26419_04
Logfile entry Description Optional Error relay
[D&T], Login, [u],
[v], [w], [y], [z] The user indicated in field [u] established a
connection with log in order indicated in field [w]
to CamDisc HNVR (0=first, 1=second, etc.).
Depending on connection mode and
configuration, the following additional information
can be displayed.
Field [v]= connection established by:
l
IM= internal remote data transmission
adapter (e.g. ISDN Card)
l
EM= external remote data transmission
adapter (e.g. MODEM)
l
NW = Network
l
UB = USB
l
UN = Unknown
Field [y] = Connection cause:
l
R= Receiver dialup
l
A= Alarm call triggered by CamDisc HNVR
l
S= Service call triggered by CamDisc HNVR
(every 24 hours)
Field [z] = indicates the temperature observed in
the device, (optional, see column "Optional")
temperature no
[D&T], Alarmcall
OK: [x], AR:[y] The transmitter creates a log file entry if an alarm
call was successful. The entry will be created
immediately after the “login” entry. It indicates
that the alarm call to the device (IP address in
field [x]) was successful.
Field [y] indicates the alarm reason (AR)
Example: „Alarmcall OK: 192.168.31.6, AR:25“ no no
[D&T], Logout, [w],
[y], [z] The user indicated in field [w] terminated the
connection with log in order indicated in field [y] to
CamDisc HNVR (0=first, 1=second, etc.). Field
[z] indicates the cause of termination:
l
CMD = Termination by receiver software
command (standard)
l
DCD = Modem, ISDN-TA, or TCP/IP alarm
adapter Data Carrier Detection was
deactivated (standard)
l
TI Timeout = No data transmission possible
for 60 seconds (error)
l
ADC = AlarmDisConnect, caused by alarm
(optional feature, to be set with device
configuration)
see ADC no