Xtralis HeiTel CamDisc HNVR, Product Manual

Page: 42 / 68

CamDisc HNVR Product Guide HeiTel by Xtralis
42 26419_04
Logfile entry Description Optional Error relay
[D&T], Track, [x],
reached warning
threshold Overwrite protection is activated, the percentile
warning threshold has been reached for a camera
track [x]. no yes
[D&T], Hard disk
full, Track, [x] Overwrite protection is activated and the storage
medium capacity for camera track [x] is depleted;
no more pictures can be recorded. no yes
[D&T], Period of
recording reached,
Track, [x] The minimum recording period for camera track
[x] can no longer be maintained. no yes
[D&T], No video
signal on input, [x] This message is written for detected video signal
errors for video input [x] yes yes
[D&T], HDD Read
Error, [x] Storage medium read error. Field [x] indicates
hard disk model. no yes
[D&T], HDD Write
Error, [x] Storage medium write error. Field [x] indicates
model of storage medium. no yes
[D&T], Hardware
error, [x] Indicates a serious hardware problem. Field [x]
classifies the error. Text display is as follows:
l
Clock = Timer module
l
Clear Flash = Faulty flash memory
l
Write Flash = Faulty flash memory
l
DSP = Faulty DSP module
l
DSP-RAM = Faulty DSP memory
l
Shared memory = Faulty memory module
The device requires repair.
no yes
[D&T], No secure
code, can't store
pictures The hard disks are configured specifically for
operation with CamDisc HNVR by the
manufacturer. The device cannot be operated
with standard hard disks. no yes
[D&T], Temperature
very high Critical temperatures of at least 70°C were
observed inside the device. no yes
[D&T], Clock
adjusted The clock could not be read at startup. The
firmware date of manufacture has been set. This
may indicate a faulty battery. no yes
[D&T],
Videodecoder [x]
error The video decoder has been checked at startup.
This message indicates a faulty video decoder at
video input [x]. no yes
Connection messages