- Transpose Notes -12
→ Transposes the notes (CV and MOD) in the pattern down by one
octave.
-
Clock
→ Change clock dividers or multipliers of the marked tracks. It got the same functionality
as if it was un-marked (see →
).
The current functions in the pattern screen:
If nothing is marked:
-
Undo
The last change in the pattern screen (this pattern, not from others) will be reverted.
-
Randomize range
: Randomizes the current value if possible. The range of the randomized
values are derived from the selected Range (see
)
-
Reset Track FX
→ Resets all FX / Current values of the track
-
Playback –
Same functionality as
the
function in the sequencer nerd Menu.
-
Stop all Sound
→ will stop all sounds/gates, midi, modulators of the current track. When pressed
while holding
SHIFT
, then all sounds of all tracks are being stopped.
-
Edit Pattern Name
→ Opens a texteditor to add/ change the name of the current pattern
-
Pattern Length
→ Sets the length of the current pattern between 1..64 steps. The sequencer will
play the pattern only for the selected amount of steps. Also all jump and random jump functions will
end up being within the selected length.
SHIFT + CURSOR LEFT/RIGHT
will increase/decrease by
1 step and
SHIFT+CURSOR UP/DOWN
will browse between these standard step amounts:
64,32,16,8,4,2,1
As you can change this value while the sequencer plays, it is possible to get ‘out of sync’ for the
current track when changing the length. You can press the
OK
button to re-synchronize the track
directly to the mainclock. Also changing the length while holding the OK button will directly re-
synchronise the track while changing the length. Use this to create nice drum/synth fills in your live
set.
This will currently work only well with regular groove settings and if there is no clock scale running
on the track.
A default patternlength for new patterns can be set up in the Setup menu.
-
Track Setup -
Enters the
for the current track
-
Export Pattern
→ Choose to export the current Pattern onto the SD card. The file menu appears
with the current pattern number and name (if a pattern name is available). The name can be further
edited and by selecting ‘ready’ the pattern is being saved onto the SD Card (project folder).
Additionally the Project name and pattern type is being added.
NerdSEQ – a tracker based Eurorack sequencer
Page 107
User Manual Revision V1.26 for Firmware V1.26
12 July 2022
