XOR electronics Nerdseq, User Manual

Page: 106 / 133

The current functions can be found in the sequencer screen:
If nothing is marked:
- Undo → The latest change in the sequencer screen can be undone so iif you accidentally deleted
something it can be recovered. Keep in mind that only the last edit can be undone.
- Color → Sets the background color of the current cursor point. Change the color using
SHIFT+CURSOR LEFT/RIGHT
- Reset Track FX → Resets all FX / Current values of the tracks
- Reset All FX → Resets all FX / Current values of all tracks
- Resync Track – Resynchronizes the Track to the mainclock on the clock zero crossing
- Resync All – Resynchronizes all Tracks to the mainclock on the clock zero crossing
- Track Clock → Change clock dividers or multipliers of the track. If the player is playing then the
changes are applied at the end of the pattern. If it is not playing, the changes are applied directly.
Press SHIFT+OK to execute the new clock selection directly (might result in a out-of-sync pattern).
Change using
SHIFT+CURSOR LEFT/RIGHT. By pressing SHIFT+OK on the menu setting, the
new clock setting will be activated immediately. The clock will then be changed from the current
stage on and not synchronized to the mainclock or patterns.
- Playback → Changes the playback order of the track. Changing the value using SHIFT
LEFT/RIGHT will activate it after the pattern is finished. Press OK to activate the new order directly.
You can create a new pattern from the selected playback order by pressing SHIFT+OK.
For more information about the available playback order see the FX function
Playback Order.
- Track Transpose → Changes the current transpose of the track. ( +- semitones). The transpose
only works if track transposing is allowed in the → Track Setup Screen
Change using SHIFT+CURSOR LEFT/RIGHT/UP/DOWN
- Track Setup → Enters the track setup screen for the current track. (see → Track Setup Screen )
If an area or field is marked:
- Color → Sets the color of the marked area. Change the color using SHIFT+CURSOR
LEFT/RIGHT
- Transpose Notes +1 → Transposes the notes (CV and MOD) in the pattern up by one semitone.
- Transpose Notes -1 → Transposes the notes (CV and MOD) in the pattern down by one
semitone.
- Transpose Notes +12 → Transposes the notes (CV and MOD) in the pattern up by one octave.
NerdSEQ – a tracker based Eurorack sequencer Page 106
User Manual Revision V1.26 for Firmware V1.26 12 July 2022