Clone ENV 1..8:
This will exactly clone the generated envelope so you can use it for
multiple destinations. Note that all envelope curve settings have no effect here.
Destination:
Defines the destination which the envelope should use/manipulate.
CV 1..6:
The envelope will be routed to the CV outputs 1..6
MOD 1..6:
The envelope will be routed to the MOD outputs 1..6
Volume 1..4:
The envelope will act as a VCA on the selected audio channel (eg on
samples/waves)
Pitch 1..4:
The envelope will overrule the pitch of the selected audio channel
Bitcrush 1..4:
The envelope will overrule the bitcrush of the selected audio channel
Distort 1..4:
The envelope will overrule the distortion of the selected audio channel
Wavefold 1..4:
The envelope will overrule the wavefold of the selected audio channel
The Source and the Destination settings can be activated by pressing either the
OK
button or by
leaving the envelope screen.
SHIFT+DELETE
on them will set them to ‘none’.
If routed through an Automator, more manipulation of the envelope is available and these can then
also be routed through all Automator destinations. Keep in mind that the rate (as in processing-
rate/resolution) of the envelope will degrade to the Automators processing rate.
Besides the fixed sources, an envelope can also be gated through FX commands.
You can see an animation of the current selected envelope stages when it is running.
Project screen
The project screen contains some project related functions which can be different for each project.
Its’ settings will be loaded and saved when loading/saving a project.
The following menu items are available:
Tempo
Change the global tempo between 1 to 500 BPM. (
SHIFT + LEFT
to decrease,
SHIFT +
RIGHT
to increase).
Additionally it contains a Nudge function. Nudging is what a DJ does…..or used to do ;-) ….to
synchronize records with each other by pushing or shortly slowing down the record. Holding
SHIFT+OK
and then
CURSOR UP/DOWN
, will roughly nudge the sequencer forward and
backward and with
CURSOR LEFT/RIGHT
it will finely nudge the sequencer forward and
backward.
NerdSEQ – a tracker based Eurorack sequencer
Page 82
User Manual Revision V1.26 for Firmware V1.26
12 July 2022
