263
Restricting Device Access
N.5.8.2
Using Internet Services, access to the Device's Services can be restricted by Host IP Address.
To restrict device access, perform the following steps:
1. Open your Web browser and enter the TCP/IP address of the Device in the Address or Location field.
Press
Enter
.
2. Click
the
Properties
tab.
3. Click the plus symbol (+) to the left of the
Protocol Settings
file folder.
4. Select
TCP/IP
in the directory tree
5. Scroll down the page to reveal the
IP Address List
subject label.
6. Enable (with a check mark) the
IP Filter
check box.
7. Click the available
Edit
button.
8. When the list of ten lines of IP Address and Subnet Mask entry boxes is displayed, supply the IP
Addresses and Subnet Masks of up to ten hosts (individual workstations) that are authorized to
access the Device's services.
Caution:
All other hosts, not specified in this list, will be prevented
from accessing the Device's services.
9. Click
the
Apply
button to accept the changes. To exit the settings screen without making changes,
click the
Undo
button.
Note: Changes to settings are not applied until you restart the Device. A Reboot Machine button is
available on the Status Tab of Internet Services.
Summary of Contents for WorkCentre 7228
Page 1: ...System Administrator s Guide WorkCentre 7228 7235 7245...
Page 300: ...701P46436...
