![Xerox WorkCentre 7228 System Administrator Manual Download Page 158](http://html2.mh-extra.com/html/xerox/workcentre-7228/workcentre-7228_system-administrator-manual_4265809158.webp)
158
Fax Mode Settings (including Fax Defaults and Fax Control)
These settings include: Screen Defaults, Fax Defaults, Fax Control, File Destination / Output Destination,
Reduce/Enlarge Presets, Original Size Defaults, and Local Terminal Information.
For information on
File Destination / Output Destination settings
and
Local Terminal Information
settings
refer to the separate topics, with those names, in this Fax section of this guide.
Note: Information on Fax Defaults and Fax Control is critical to the operation of the Fax feature and
should be carefully evaluated to assure that settings are correct for the current working environment.
1. If necessary, press the
Log In / Out
button and enter [11111] or current password. Touch
Confirm
,
then touch
System Settings
and
System Settings
again.
2. From the System Settings screen, touch
Fax Mode Settings
.
3. Touch
Screen Defaults
.
4. Select a Line to enter or change, then touch
Change Settings
. Touch
Save
to save any new
settings.
•
Fax Screen Default. Select General Settings or Address Book This will be the Fax service
screen that users see when they touch the Fax button.
•
Address Book Default. Leave this setting at the default of 1, or enter an address book (Fax
mailbox) number to display when the Address Book button is touched by users of the Fax service
screen. Note that the Fax mailbox needs to be created in advance of this setting.
•
Transmission Screen. Select either On or Off.
5. Touch
Close
until the Fax Mode Settings screen is displayed.
6. Touch
Fax Defaults
.
7. Select a Line to enter or change, then touch
Change Settings
. Touch
Save
to save any new
settings.
•
Resolution.
•
Original Type.
•
Lighten/Darken.
•
Mixed Size Originals.
•
Communication Mode – Select G3 Auto or F4800.
•
Delayed Start – Start Time. This can be a useful feature for saving time-based phone charges.
•
Send Header. Select On or Off. This adds the sender name and phone number to faxes.
•
Transmission Report. Select On or Off. If set to On a report will print when transmission
completes successfully.
•
Delivery Receipts/Read Receipts.
•
IFax Profile.
•
Ifax Subject.
Summary of Contents for WorkCentre 7228
Page 1: ...System Administrator s Guide WorkCentre 7228 7235 7245...
Page 300: ...701P46436...