Xerox WorkCentre 7228, System Administrator Manual

Page: 150 / 300

150
10. Select the items you would like to enter information for and touch
Change Settings
.
a. Fax Number, up to 128 characters, then touch
Save
.
b. Recipient, up to 18 characters, then touch
Save
.
c. Index, only 1 digit (used for a quick find), then touch
Save
.
d. Relay Station setup, On or Off, then touch
Save
.
e. Communication Mode, G3 Auto or F4800, then touch
Save
.
f. Resolution, choose one, then touch
Save
.
g. Cover Note, On or Off, then touch
Save
.
•
If On select Comment (Recipient Comment) then touch
Save
.
h. Maximum Image Size, choose one then touch
Save
.
i. Delayed Start, On or Off, then touch
Save
.
•
If On, choose Start Time, then touch
Save
.
j. Remote Mailbox, On or Off, then touch
Save
.
•
If On, enter Mailbox number, then touch Next, and password if required.
k. F Code, On or Off, then touch
Save
.
•
If On, enter F Code and password, then touch Next.
Note:
F Code is the transmission
procedure set by the Communications and Information Network Association of Japan. DTMF
Method: G3 Fax machines that support Manual Send can also make Relay Broadcasts for
the machine. Refer to the Fax section of the Device’s User Guide for full information.
l. Relay Broadcast, On or Off (This feature supports transmitting documents through a Relay
Station. Refer to the Fax section of the Device’s User Guide for full information.)
•
If On, enter 2 digit Relay Station ID, touch Enter/Change Recipients.
•
Enter Address Number or the Group Number and touch Add.
•
Print at Relay Station, On or Off, then Touch Save.
10. When complete, touch
Save
to exit the settings screen.
11. Touch
Close
to exit the Address Book screen.
12. Touch
Close
to exit the Setup Menu screen.
13. Touch
Exit
to exit the System Settings screen.