151
Group Send Setup
FP5
This setting supports Group Send (broadcast) Fax transmissions to up to 20 address numbers in a pre-
designated group. Refer to the Group Send topic in the Device’s User Guide for full information. To set
up a Group, perform the following steps.
1. Press
the
Log In / Out
button to enter System Administration Mode.
2. On the keypad enter [11111] or current password. Touch
Confirm
when finished.
3. Touch
System Settings
.
4. Touch
Setup Menu
.
5. Touch
Group Send
.
6. Select a Group number.
7. Touch
Create/Delete
.
8. Use the numeric keypad to enter the three-digit Address Numbers of recipients contained in the
machine’s Address Book.
Note: Refer to the Address Book Setup topic in this section to learn how to set up address numbers
so that they are available for selection here.
9. Touch
Add to this Group
to add recipients, one number at a time, to the group.
10. When complete, touch
Save
.
11. Touch
Close
until the System Settings screen (with an Exit button) is displayed.
12. Touch
Exit
to exit the System Settings screen.
Summary of Contents for WorkCentre 7228
Page 1: ...System Administrator s Guide WorkCentre 7228 7235 7245...
Page 300: ...701P46436...
