252
Configure NetWare Settings
N5.2
1. Open your Web browser and enter the TCP/IP address of the Device in the Address or Location field.
Press
Enter
.
2. Click
the
Properties
tab.
3. Click the plus symbol (+) to the left of the
Protocol Settings
file folder.
4. Select
NetWare
in the directory tree.
Note:
If NetWare is not displayed, click on Port Status to see if
the NetWare Port is checked (enabled).
5. The available selections include:
•
A Host Name (Print Server) Text box. Use this name to create the Print Server (in Bindery) and
Print Server object (in NDS).
•
An Active Mode selection box for Directory (NDS) or Bindery.
•
A (Primary) File Server Name entry box (Bindery).
•
A Polling Interval entry box for Queue Polling Interval (1 - 1000 seconds).
•
A Number of Searches entry box for SAP frequency (1 - 100 seconds, with the ability to set to
zero, which is off).
•
Two Password text boxes for logging into the NetWare Server.
•
A TBCP Filter checkbox (displayed when PostScript is enabled).
•
Under the NDS Subject Label there is a text box for Tree, followed by one for Context.
•
A Frame Selection box, with a default of Auto (auto sensing). Other selections include Ethernet II
(used when running TCP/IP on your network), Ethernet 802.3 (used for NetWare versions up to
3.11), Ethernet 802.2 (the default for NetWare 3.12 and later), and Ethernet SNAP (used on
networks running TCP/IP and/or AppleTalk).
•
A display of the Device's Network (MAC) address.
•
A Service Location Protocol (SLP) Active Search Enablement box. For use with NetWare 5 and
newer versions, this protocol helps to reduce service advertising network traffic.
Summary of Contents for WorkCentre 7228
Page 1: ...System Administrator s Guide WorkCentre 7228 7235 7245...
Page 300: ...701P46436...
