259
Configure SMB
N5.5
1. Open your Web browser and enter the TCP/IP address of the Device in the Address or Location field.
Press
Enter
.
2. Click
the
Properties
tab.
3. Click the plus symbol (+) to the left of the
Protocol Settings
file folder.
4. Select
SMB
in the directory tree.
5. The available selections include:
A text box indicating Workgroup name.
A text box indicating the (SMB) Host name.
An entry box for the maximum number of connections allowed, labeled Maximum Sessions.
A TBCP Filter checkbox (displayed when PostScript is enabled).
An enabling checkbox for supporting Unicode (supplying the Host name and Workgroup name in
Unicode characters during SMB transmission).
An enabling checkbox for Auto Master Mode. This enables the machine to become the master
browser when no other machine is performing the master browser function for the workgroup.
An enabling checkbox for Encrypt Password (during SMB transmission).
6. Accept the default value, or enter a value from 3 to 10, for maximum number of connections allowed
in
Maximum
Sessions
.
7. Accept
the
Workgroup name
shown, or enter in your own workgroup name.
8. Type
the
SMB
Host Name
or accept the name shown.
9. Check
the
Auto Master Mode
box to assure that the machine is always listed in the Workgroup.
10. Check
Password Encryption
to encrypt SMB server passwords, if desired.
11. Click the
Apply
button to apply setting changes, or the
Undo
button to return settings to their
previous values.
Note: Setting changes are not applied until you restart the Device. There is a convenient Reboot
Machine button on the Status Tab of Internet Services.
Summary of Contents for WorkCentre 7228
Page 1: ...System Administrator s Guide WorkCentre 7228 7235 7245...
Page 300: ...701P46436...
