38
Microsoft (NetBEUI) Networks
B5
Before You Start
1. Print
a
Settings List
as stated in the
Network Connectivity
section of this guide.
2. On the Settings List,
verify that SMB is enabled
. Also, verify that the default name of the NetBEUI
workgroup is "Workgroup" and that the Device has a unique name (that is, a name not the same as
any other device in your workgroup). To enable SMB, if required, follow the procedure below. To
modify the name of your Workgroup, or Device's name within your workgroup, use your workstation's
Web browser to access the Internet Services (Web Pages) residing in the Device as described below.
Enabling the SMB Setting at the Device, if required
1. Press
the
Log In / Out button
on the Control Panel.
2. Press
the
"1" key
on the numeric keypad five consecutive times. (This is the factory default
"password.")
3. Press the rectangular
Confirm button
on the touch screen.
4. Press
the
System Settings button
(the right-hand button of the two buttons displayed on the touch
screen). Note: If you press the left button by mistake, the Main menu will be displayed and you will
have to start over at step one above.
5. Press
the
System Settings button
.
6. Press
the
Network Settings button
.
7. Press
the
Port Settings button
to access the Port Settings menu.
8. When the Port Settings menu displays, press the
SMB
selection line.
9. Press
the
Change Settings button
in the lower right corner of the Port Settings menu screen.
Summary of Contents for WorkCentre 7228
Page 1: ...System Administrator s Guide WorkCentre 7228 7235 7245...
Page 300: ...701P46436...
