65
Windows 95/98/Me Workstation Print Driver Installation
Before you start
Obtain the Print Driver for your workstation's operating system. Drivers are available on one of the CD-
ROMs that came with your Device. They are also typically available for downloading in self-extracting Zip
file format from the Internet at www.xerox.com.
Verify that the TCP/IP Protocol is installed in the workstation
1. At the Desktop, right mouse click the Network Neighborhood icon ("My Network Places" in Windows
Me).
2. Left mouse click on
Properties
.
3. Click on the
Configuration
TAB and verify that the TCP/IP Protocol has been loaded.
4. Note: If the TCP/IP Protocol has NOT been loaded, click the
Add
button, select
TCP/IP Protocol
from the available list and click
OK
. If the setup program fails to find the required files, you will have
to click
Have Disk...
to load the protocol from the Operating System installer disk for this workstation.
5. Click
on
TCP/IP Protocol
to highlight it, and click on the
Properties
button of the Configuration
window.
6. If using Dynamic TCP/IP Addressing, select the radio button for Obtaining an IP Address
Automatically, and supply the appropriate Server address information.
7. If using Static TCP/IP Addressing, left mouse click on the radio button marked “Specify an IP
Address” to enable the manual configuration option.
8. Enter in the required IP Address, Subnet Mask, and Gateway information for this workstation. For
smaller networks, the Windows default values for Subnet Mask and Default Gateway may be
applicable. Check with a QUALIFIED Network Administrator for Subnet Mask and Default Gateway
requirements.
9. Click
OK
.
Summary of Contents for WorkCentre 7228
Page 1: ...System Administrator s Guide WorkCentre 7228 7235 7245...
Page 300: ...701P46436...
