18
Port Status (Parallel Port Enablement)
1. On the Parallel Port selections menu, press the selection line labeled
Port Status
.
2. Press
the
Change Settings
button.
3. On the Parallel Port Status screen, note which of the two buttons is highlighted as the current setting
for Parallel Port Enablement. The available settings are Enabled or Disabled.
4. To change settings, press your setting of choice, then click the
Save
button on the touch screen.
5. To exit the screen, without making any changes, click the
Cancel
button on the touch screen.
Print Mode
1. On the Parallel Port selections menu, press the selection line labeled
Print Mode
.
2. Press
the
Change Settings
button.
3. On the settings screen, note which one of the displayed buttons is highlighted as the current setting
for Parallel Print Mode. This setting informs the Controller of the Page Description Language (PDL)
being used by your print jobs. The available settings are Auto (default), PostScript, HP-GL/2, PCL,
and TIFF.
Auto
enables the Controller to automatically detect and select the appropriate PDL.
4. To change settings, press your selection of choice, then click the
Save
button on the touch screen.
5. To exit the screen, without making any changes, click the
Cancel
button on the touch screen.
Summary of Contents for WorkCentre 7228
Page 1: ...System Administrator s Guide WorkCentre 7228 7235 7245...
Page 300: ...701P46436...
