manualshive.com logo in svg

Xerox WorkCentre 7228, System Administrator Manual, Page: 209 / 300

Share
Download
Xerox WorkCentre 7228 System Administrator Manual Download Page 209

209 

Configuration of HTTP Communication Encryption 

Installation Overview 

Configuration on the Machine 

Two methods are available depending on the type of certificate. 

- Create a self-signed certificate on the machine with Internet Services, and enable HTTPS.  This method 
is used primarily for Server certificates. 

- Enable HTTPS, and import a signed certificate from a Certificate Authority, using the Certificate 
Management hot link on the Properties Page of CentreWare Internet Services.  

Note:

  To see this hot 

link, at least one certificate must have been created and stored on the machine.   This is one of the 
purposes for creating a self-signed certificate. 

Configuration on a Computer 

Use IP addresses beginning with "https" in web browser applications. 

 

Summary of Contents for WorkCentre 7228













































































































































































































































































































Reviews:

No comments