113
Enabling the E-mail Ports and Setting TCP/IP
First enable the E-mail ports, then set the IP address.
Note: The configuration can also be performed using CentreWare Internet Services.
For information on how to use CentreWare Internet Services, refer to the Internet Services section of
this guide.
1. Display the System Administrator Menu screen.
a. Press
the
Log In/Out
button.
b. Enter the user ID with the numeric keypad or a keyboard displayed by pressing Keyboard, and
select
Confirm
.
Note: The default user ID is “11111”. When using the Authentication feature, a password is required.
The default password is “x-admin”.
c. Select
System Settings
.
2. Enable a port which is used for the E-mail feature.
a. Select
System Settings
.
b. Select
Network Settings
.
c. Select
Port Settings
.
d. On the Port Settings screen, select
Send E-mail
and then select
Change Settings
.
e. On the Send E-mail screen, select
Port Status
and select
Change Settings
.
f. On the Send E-mail Port Status screen, select
Enabled
then select
Save
.
g. Select
Close
.
h. On the Port Settings screen, select
Receive E-mail
, then select
Change Settings
.
i. On the Receive E-mail screen, select
Port Status
, then
Change Settings
.
j. On the Receive E-mail Port Status screen, select
Enabled
, then select
Save
and
Close
.
k. On the Port Settings screen, select
Mail Notice Service
, then select
Change Settings
.
l. On the Mail Notice Service screen, select
Port Status
, then
Change Settings
.
m. On the Mail Notice Service – Port Status screen, select
Enabled
, then
Save
.
n. Select
Close
repeatedly until the Network Settings screen is displayed.
Summary of Contents for WorkCentre 7228
Page 1: ...System Administrator s Guide WorkCentre 7228 7235 7245...
Page 300: ...701P46436...
