Status, Error, and Service Messages
Phaser® 6115MFP Multifunction Product
11-35
TOP COVER OPEN
CLOSE TOP COVER
The engine cover is open.
Close the engine cover.
*JOB CANCELED*
While a document was being
scanned from the original glass
in Scan mode, more than one
minute had passed after the first
page of the document was
scanned or the data could not be
sent. Therefore, the scan job
was automatically canceled.
Turn the machine off, and then, after
waiting a few seconds, turn it on
again.
When sending multiple pages, for
example, from a book, scan the first
page, and then scan the next page
within one minute.
INCORRECT PAPER
LOAD PAPER(XX)
ID card copying is specified, but
paper of a size other than A4,
Letter or Legal is loaded in the
paper tray.
Load A4, Letter- or Legal-size paper
in the paper tray. ID card copying
cannot be used with paper of a size
other than A4, Letter or Legal.
MEDIA TYPE
ERROR
LOAD CORRECT
MEDIA
TRANSPARENCY was selected
as the paper type, but paper
other than transparencies is
loaded into Tray 1.
Load the correct media type in Tray 1.
A setting other than
TRANSPARENCY was selected
as the paper type, but
transparencies are loaded into
Tray 1.
MEMORY FULL
PRESS ANY KEY
The machine has received more
data than can be processed with
its internal memory.
Cancel the current job.
Turn the machine off, and then, after
a few seconds, turn it on again.
Decrease the amount of data to be
printed (for example, by decreasing
the resolution), and then try printing
again.
LOAD CORRECT
PAPER
Duplex (2-Sided) printing is
specified, but no paper
compatible with duplex (2-Sided)
printing is loaded.
Load paper compatible with duplex
(2-Sided) printing. Only plain and
letterhead paper are compatible with
duplex (2-Sided) printing.
*NO NETWORK
SETTING*
The network settings had not
been completely specified when
the machine was switched to
Scan mode.
Before scanning in Scan mode,
specify the network settings in the
NETWORK SETTING menu.
*NOT CORRECT
E-MAIL ADDRESS*
An email address was not
programmed in the one-touch
dial key or speed dial number.
(This message appears if a fax
number or email address is
programmed for group dialing.)
Before sending scan data using one-
touch dial keys or speed dial
numbers, register an email address
with the one-touch dial key or speed
dial number.
*NOT REGISTERD*
An email address was not
programmed in the one-touch
dial key or speed dial number.
Message
Definition
Solutions
