Networking Protocols
Phaser® 6115MFP Multifunction Product
4-5
Installing Over a Network Connection
1.
Turn on the product and the computer.
2.
Connect the product to the network using the recommended hardware and cables.
3.
Configure the product’s network address, which is required to identify the product on the
network.
■
Windows operating products: Run the installer on the
Software and Documentation
CD-ROM
to automatically set the product’s IP address if the product is connected to
an established TCP/IP network. You can also manually set the printer’s IP address on
the control panel. Once the IP address is set, continue the installation procedure to
install the driver software.
■
Macintosh products: Manually set the product’s network address (for TCP/IP) on the
control panel. Install the driver software on the computer from the
Software and
Documentation CD-ROM
.
If the
Software and Documentation CD-ROM
is not available, you can download the latest
drivers from
www.xerox.com/drivers
.
See also:
Features Setup Guide
at
www.xerox.com/office/6115support