![background image](http://html2.mh-extra.com/html/xerox/phaser-6115-mfp/phaser-6115-mfp_user-manual_4146424127.webp)
Scan to Email (Network Only)
Phaser® 6115MFP Multifunction Product
8-5
Scan to Email Using the ADF
Multiple page documents can be scanned using the ADF.
When placing the original documents in the ADF:
■
Do not load documents that are bound together with staples or paper clips.
■
Do not load more than 50 sheets.
■
Do not open the ADF cover while documents are loaded.
■
Make sure there are no documents on the document glass.
To scan documents to email using the ADF:
■
For information on specifying detailed settings, such as data format or compression,
see
Changing the Scan Mode Settings
on page 8-9.
■
For information on changing the image size, see
Changing the Scanned Image Size
on
page 8-9.
1.
Press the
Scan
button to enter scan mode.
2.
Place the documents in the ADF faceup with the first page on top of the stack.
3.
Adjust the document guides to fit snugly against the originals.
4.
Specify the email address of the recipient in one of the following ways:
■
Entering Text on the Control Panel
on page 9-14
■
Using the One-Touch Dial List
on page 8-8
■
Using the Speed Dial List
on page 8-8
■
Using the Phone Book List
on page 8-8
5.
Enter a subject line using the alphanumeric keypad, and then press the
Menu/Select
button.
6.
Enter any additional
CC
email addresses, and then press the
Menu/Select
button.
7.
Use the
Left Arrow
or
Right Arrow
button select
Gray
or
B&W
as the color mode, and
then press the
Menu/Select
button.
Note:
Color cannot be selected when scanning from the ADF due to memory limitations.
6115-078