Loading Media
Phaser® 6115MFP Multifunction Product
6-6
Loading Plain Paper
Use plain paper that is:
■
Kept on a flat, level surface in its original wrapper until it is time to load it.
■
Suitable of laser printers, such as standard or recycled office paper.
■
Keep media between 35% and 85% relative humidity.
Do not use media that is:
■
Coated with a processed surface (such as carbon paper, digitally gloss-coated media,
and colored paper that has been treated.
■
Carbon backed
■
Iron-on transfer media (such as heat-sensitive paper, heat-pressure paper, and heat-
press transfer paper)
■
Cold-water-transfer paper
■
Pressure sensitive
■
Designed specifically for inkjet printers (such as superfine paper, glossy film, and
postcards)
■
Already printed on by another printer, copier or fax machine
■
Dusty, wet, or damp
■
Layered
■
Adhesive
■
Folded, creased, curled, embossed, warped, or wrinkled
■
Too slick, too coarse, or too textured.
■
Too thick or too thin
■
Composed of foil or gilt; too luminous or shiny
■
Heat sensitive or cannot withstand the fusing temperature (180
o
C [356
o
F])
■
Irregularly shaped (not rectangle or not cut at right angles)
■
Attached with glue, tape, paper clips, staples, ribbons, hooks, or buttons
■
Acidic
■
Any media not supported by this product
Capacity
Tray 1
Up to 200 sheets, depending on the paper weight
Tray 2
Up to 500 sheets, depending on the paper weight
Orientation
Faceup
Driver media type
Plain paper
Weight
60 to 90 g/m
2
(16 to 24 lb. Bond)
2-Sided printing
(Duplexing)
See
2-Sided Printing (Duplexing)
on page 6-28.
