Methods of Setting the Product’s IP Address
Phaser® 6115MFP Multifunction Product
4-6
Methods of Setting the Product’s IP Address
This section includes:
■
Automatically Setting the Product’s IP Address
on page 4-7
■
Manually Setting the Product’s IP Address
on page 4-8
Set the product’s IP address using any of the following methods. DHCP is enabled by default
on all Phaser printers.
■
MFP ControlCentre
■
CentreWare IS
■
Dynamic (Auto IP)
Information Required for Manual IP Addressing
Information
Comments
Internet Protocol (IP) address of the product
Format is
xxx.xxx.xxx.xxx
, where
xxx
represents
a decimal number from 0–255.
Network Mask
If you are unsure, leave this blank; the product
chooses an appropriate mask.
Default Router/Gateway address
Router address is required to communicate with
the host device from anywhere other than the
local network segment.
