Xerox Phaser 6115 MFP User Manual Download Page 82

Page: 82 / 219

Specifying Print Settings

Phaser® 6115MFP Multifunction Product

5-13

Specifying Print Settings

The following dialog box appears when

Print...

is selected from the

File

menu in the

application being used.

Select

Print...

from the

File

menu, the

Print

dialog box appears.

Select your printer in the

Printer

pop-up menu. The

Print

dialog box is used to specify

the following print options.

Print Dialog Description

Copies and Pages

The

Copies and Pages

section is used to specify the number of copies to print and the range of

pages to print.

Copies

: This specifies the number of copies to be printed. If the

Collated

check box is

selected, all pages in the documents are printed as sets of printouts.
For example, if 5 is entered for

Copies

and

Collated

is selected, the document is printed

five times from the first page to the last page.

Pages:

■

All

: Prints all pages in the document.

■

From, to

: Specifies the range of pages to be printed.

Section

Description

Copies and Pages (page 5-13)

This section contains options for the number of copies to be
printed and the range of pages to print.

Layout (page 5-14)

This section contains options for specifying the page layout
when printing.

Duplex (2-Sided) (page 5-14)

This section contains options for 2-sided printing. This is only
available when the optional duplex unit is installed.

Output Options

This allows you to print your output to a specific format, such as
PDF.

Scheduler (page 5-14)

This section contains options for specifying the print timing and
priority of jobs.

Paper Handling (page 5-15)

This section contains options for specifying the pages to be
printed and their printing order.

ColorSync (page 5-15)

This section contains options for specifying ColorSync settings.

Cover Page (page 5-15)

This section contains options for specifying cover page settings.

Paper Feed (page 5-15)

This section contains paper feed options.

Summary of Contents for Phaser 6115 MFP




























































































































































































































Search results

Summary of Contents for Phaser 6115 MFP

Reviews:

Related manuals for Phaser 6115 MFP

Brands by name

Popular brands

Xerox Phaser 6115 MFP, User Manual

Search results

Summary of Contents for Phaser 6115 MFP

Reviews:

Related manuals for Phaser 6115 MFP

Brands by name

Popular brands