Operator Guide
2-3
Managing the printer
For systems with small paper (7 by 10-inch/178 by 254
mm) enablement:
Systems with this option have three levers. To process
heavy papers, turn the levers as shown in the following
figure.
Figure 2-2. Three levers in systems with small paper
enablement
NOTE: Use the same pressure setting for all levers.
3. When the job is complete, return the levers to their normal
positions.
NOTE: Positioning may be affected by machine tolerance, the
paper supplier, or job type (for example, duplex).
Loading paper
Your printer may have up to six feeder trays: two processor trays
(trays 1 and 2) and two to four high-capacity trays (trays 3
through 6). Up to six different stocks may be used within a print
job, including oversized cover stock or tabs.
•
You can unlock, pull out, and load any tray from which paper
is not being fed, without interrupting printing.
•
If you open a tray that is in use, feeding switches to a backup
tray. If no tray is available, printing stops.
Turn to the right
Turn to the right
Turn to the left
Summary of Contents for Nuvera 100
