Xerox Nuvera 100, Operator'S Manual

Page: 41 / 234

Operator Guide 1-21
Overview
Feeder trays
Multiple feeder trays can be configured to feed paper for jobs in
the most effective manner. For example, the trays can provide
nonstop printing of a complex job that requires many paper
stocks, or only a few stocks, by using the trays continuous
loading capability. A different input tray can also be selected for
each copy of a specific page in a print job, for example, to
provide different paper colors for specific pages.
The printing system may have up to six feeder trays: two
processor feeder trays and two to four high-capacity trays. Four
addressable input trays are standard with the system, and two
additional high-capacity trays are optional.
Processor feeder
trays
Two processor feeder trays (trays 1 and 2) are located in the
main part of the printer and are not part of a feeder/stacker
module.
Trays 1 and 2 can handle paper sized from 8 by 10 inches / 203
by 254 mm to 9.02 by 14.02 inches / 230 by 356 mm.
Feeder tray
capacity
The feeder trays have the following capacities, based on 20
pound or 80 gsm (grams per square meter) paper:
• Tray 1: 1100 sheets
• Tray 2: 600 sheets
• Trays 3, 4, 5, and 6 (high-capacity trays): 2600 sheets
each
An elevator moves each tray up or down when it is in use. In
each tray, a control panel consisting of a button, indicators, and
paper level displays controls the elevator tray and indicates its
status.