Xerox Nuvera 100, Operator'S Manual

Page: 64 / 234

Overview
1-44 Operator Guide
Paper width and throughput speed (LCDS printing only)
The width of the paper you use for your LCDS print job is directly
related to the rate at which the printer can print the job. The rate
at which a job prints is called the “throughput speed” and is
measured in pages per minute (ppm).
NOTE: “Pages per minute” actually means “impressions per
minute,” referring to one side of a printed sheet.
A pitch is the amount of time the printer takes to image a page on
the photoreceptor belt. The term “pitch mode” refers to the
number of pitches that can occur during one complete
photoreceptor revolution. The pitch mode in which a specific job
prints is based on the paper size used for that job.
The following table lists the pitch mode boundary values, paper
widths, and related printing speeds for the system. The chart
shows that the shorter the paper width, the higher the pitch mode
and the faster the throughput speed (higher page per minute
rate).
Table 1-5. Throughput data for DP100
Pitch Paper width Speed
5 7 to 12.12 in / 178 to 308 mm 100 ppm
4 12.12 to 15.31 in / 308 to 389 mm 77 ppm
3 15.31 to 17 in / 389 to 432 mm 58 ppm
Table 1-6. Throughput data for DP115
Pitch Paper width Speed
6 7 to 10.19 in / 178 to 259 mm 116 ppm
5 10.19 to 12.12 in / 259 to 308 mm 96 ppm
4 12.12 to 15.31 in / 308 to 389 mm 77 ppm
3 15.31 to 17 in / 389 to 432 mm 58 ppm