Xerox Nuvera 100, Operator'S Manual

Page: 113 / 234

Operator Guide 4-15
Maintaining the system
8. Move the green handle to the left (the latched position) to
secure the lid of the cartridge.
9. Hold the cartridge in place and pull off the paper seal.
10. Discard the seal along with the drop cloth.
11. Close the printer doors.
NOTE: If any dry ink gets on your hands, wash them with
soap and cold water. Heat sets the ink permanently. If any dry
ink gets on your clothes, brush them with a dry paper towel or
a stiff bristled brush. If this does not remove the ink
immediately, launder with detergent and cold water. Dry
cleaners should be told that the spot is dry ink for a printer, so
they will not use a solvent that sets the stain.