Managing the system
3-12
Operator Guide
Unloading a tape
Automatic
procedure
When a job is finished, the tape drive rewinds the tape and
unloads and ejects the cartridge.
Manual procedure
1. Press the Ready button to take the tape drive offline.
2. Press the Unload button.
1. Unload button
2. Ready button
The message window indicates when the tape drive is
rewinding or unloading.
Guidelines for handling cartridges
•
Never pry open the feed slot door of the tape drive.
•
Never force a tape cartridge into or out of the tape drive.
•
Never leave a cartridge in the tape drive while powering off.
This could damage data on the tape and the tape drive
components.
•
Store cartridges vertically in a clean area that has the same
temperature and humidity as the tape drive location.
If the storage environment is different, bring the cartridges
into the tape system environment 24 hours before using
them.
•
Never remove the protective wrapping until you are ready to
use the cartridge.
Summary of Contents for Nuvera 100
