Xerox Nuvera 100, Operator'S Manual

Page: 34 / 234

Overview
1-14 Operator Guide
Figure 1-5. Submission and print order of jobs in a queue
1. Queue overrides
2. Exception pages
3. Job ticket
4. Submission print protocol (lp, lpr, nprint)
5. Set page device values/PCL copy count
6. Queue defaults
You can make changes to the printing attributes of a PostScript,
PCL, TIFF, ASCII, and PDF job (that is, a non-LCDS job), as
long as the job is not streaming. This includes changing the type
of paper on which it is printed or specifying printing order from
last page to first (N to 1).
Printer overview
The printer receives data from the controller and prints the
document according to the print options specified by the user.
The printer also stacks the printed output, collates it, and, if
configured with one of the available optional third-party finishing
devices, performs finishing functions such as binding, stitching,
or perforating.
The Xerox DocuPrint 100/115/135/155/180 EPS printer is a
monochrome printer. If it receives print jobs that contain color
commands, it prints them in black or shades of gray.