Using logical processing
Using LCDS Print Description Language
3-41
ROFFSET TEST
Specifies the test expression for offsetting pages in the stacker
bin.
Syntax
ROFFSET TEST = testexp
Options
Default
No default
ROFFSET command: points to note
•
The ROFFSET feature prints the record that satisfies the test
expression according to the normal job parameters.
•
If ROFFSET is specified for an uncollated job, an offset
occurs on only the first copy of the offset page.
•
If OUTPUT OFFSET=FIRST (or ALL) was specified, and the
ROFFSET criteria is satisfied on the first page of a report, the
normal offset from the preceding report occurs.
•
If a testexp is satisfied in duplex mode, the logical page on
which the record occurs is the first logical page of a new
sheet.
If this page falls on the back side of a two-sided sheet, the
page is moved to the front of the next sheet, creating a blank
back side.
•
If segments are specified, the ROFFSET command is
ignored.
Table 3-31. ROFFSET TEST parameter options and definitions
Option
Definition
testexp
test expression.
Specifies the criteria test that, if satisfied, causes the output to be offset in the
stacker tray.
(Refer to “Coding a test expression,” earlier in this chapter, for the format and
syntax of a testexp.)
Summary of Contents for Nuvera 100
