Xerox Nuvera 100, Software Manual

Page: 263 / 498

Specifying print format parameters
Using LCDS Print Description Language 4-23
The following sections describe the syntax of the command
parameters and explain their options.
LINE BASELINE
Defines how to calculate the baseline position of the character
that is being printed.
Syntax LINE BASELINE = {TOP | CENTER | BOTTOM | LARGE[ST]}
LINE FDATA Specifies starting and ending points of the file
data within a record. Y Y N
LINE FONTINDEX Specifies that a field within the user portion of
the record defines the index to a specific font to
be used for that line. Y Y Y
LINE GDATA Specifies starting and ending points of graphic
data within a record. N Y N
LINE INKINDEX Specifies a field within a data record that
contains a number that represents the ink index
in the current ILIST. Y Y Y
LINE LPI Specifies the line spacing values for each line Y N Y
LINE MARGIN Defines the size of the left margin on a physical
page Y Y Y
LINE OVERPRINT Specifies the manner in which overprint lines
are handled. Y Y Y
LINE PCC Specifies the location of the printer carriage
control field. N Y N
LINE PCCTYPE Specifies a set of printer carriage control codes
that will be used for a job. N N N
LINE VFU Specifies a vertical format unit table that will be
used for a job. Y Y N
Table 4-24. Summary of LINE command parameters (Continued)
Parameter Specifies Online Offline DJDE