PDL principles and procedures
1-80
Using LCDS Print Description Language
Points to note for colored forms:
•
Light tints with isolated pixels of color that print on the Xerox
4850, 4890, or DP92C LPS may not be visible on the DP
EPS.
•
Colored text printed over a solid black or gray background, or
black text printed over solid colored or shaded backgrounds,
may not be visible when printed on the DP EPS. Be
especially careful in using this format, because it does not
generate displayed or printed messages.
•
600 dots per inch (dpi) tints and shades printed on DP EPS
are finer and more uniform than 300 dpi tints and shades
printed on the 4850, 4890, or DP92C HighLight Color LPS.
Other Xerox monochrome LPS jobs
You can create JSLs for the DP EPS on all of the following Xerox
families of monochrome laser printing systems:
•
4050, 4090, and 4650 LPS
•
8700, 8790, 9700, and 9790 LPS
•
4135, 4635, DP96, and DP180 LPS
You can then compile these JSLs on your DP EPS system for
printing.
Summary of Contents for Nuvera 100
