Xerox Nuvera 100, Software Manual

Page: 242 / 498

Specifying print format parameters
4-2 Using LCDS Print Description Language
ABNORMAL command
The ABNORMAL command allows you to restrict certain
operator functions and to define system responses to error
conditions.
ABNORMAL command parameters
The following table summarizes the ABNORMAL command
parameters.
The following sections describe the syntax of the ABNORMAL
command parameters and explain the parameter options.
ABNORMAL ACCTFEED
Specifies the stock from which an error sheet will feed when an
error occurs during accounting report processing.
Syntax ABNORMAL ACCTFEED = {AUX | OPR}
Table 4-2. Summary of ABNORMAL command parameters
Parameter Specifies Online Offline DJDE
ABNORMAL ACCTFEED Specifies the stock from which an error sheet
will be fed when an error occurs during the
accounting report processing. N Y N
ABNORMAL CODE Specifies how illegal function codes in the
data stream will be handled. N Y N
ABNORMAL ERROR Specifies the system response to abnormal
conditions detected while processing DJDEs. Y Y N
ABNORMAL IMISMATCH Specifies action to take when the job contains
a specification for an ink that is not loaded in
the printer. Y Y N
ABNORMAL ISUBSTITUTE Specifies whether or not an ink substitution
can be made by the operator. Y Y N
ABNORMAL OTEXT Specifies that a message will be displayed to
the operator when printing stops because of a
system rollover. Y Y N
ABNORMAL REP Generates a page offset and/or slip sheet
after recovery from a rollover. Y Y N
ABNORMAL SECURITY Enables restriction on use of certain operator
commands. Y Y N