PDL command quick reference
Using LCDS Print Description Language
B-7
OUTPUT
(Continued)
OUTPUT NTO1 = {YES | NO | n}
NO
OUTPUT NUMBER = {(pnum | num,cnum [, [findex] [,inkref]]) |
NO}
NO
OUTPUT OFFSET = {ALL | FIRST | NONE}
ALL
OUTPUT OSTK = (stockdef [,mod] [, pos] [, {RES | NORES}]
[,TABS] [, (size [, {DOTS | IN | CM}]) [, {L | P}])
Installation default
OUTPUT PAPERSIZE = {A3 | A4 | B4 | B5 | USLEGAL |
USLETTER | (x,y)}
USLETTER or A4
OUTPUT PURGE = {YES | NO}
YES
OUTPUT RESOLUTION = {300 | 600}
Installation default
OUTPUT SF1FUNCTION = {YES | NO}
NO
OUTPUT SF2FUNCTION = {YES | NO}
NO
OUTPUT SHIFT = {(v
1
,v
2
) | YES | NO}
NO
OUTPUT SIZING = {SEMIAUTO | BEST | EXACT}
SEMIAUTO
OUTPUT STAPLE = {NO | YES}
NO
OUTPUT STOCKS = stocksetname
—
OUTPUT SYSPPR = {USLEGAL | A3 | A4 | B4 | B5 |
USLETTER | (x,y)}
Size of last sheet
before system
page
OUTPUT TMODE = {width | (width [, width unit])}
NO
OUTPUT TRANS = {YES | NO}
—
OUTPUT UNITS = {size in dots}
DEFAULT
OUTPUT XMP = {DEFAULT | REPORT}
NO
OUTPUT XSHIFT = {YES | NO}, value
NO
ac:PCC
ac:PCC ADVTAPE = {YES | NO}
YES
ac:PCC ASSIGN = {(byte, ccln) | (byte, ccln [,ccln] [, ...]))}
—
ac:PCC DEFAULT = {ccln | PCCtype}
DEFAULT
ac:PCC INITIAL = {BOF |TOF}
TOF
ac:PCC MASK = value
X’FF’
Table B-2. PDL command quick reference table (Continued)
Command
Syntax
Default
Summary of Contents for Nuvera 100
