Xerox Nuvera 100, Software Manual

Page: 162 / 498

Specifying input parameters
2-54 Using LCDS Print Description Language
Example 4 The basic character set is EBCDIC. The editor that was used to
edit the JSL file is limited to uppercase only:
VOLUME command
The VOLUME command specifies input medium and data
characteristics.
VOLUME command parameters
The following table summarizes the parameters of the VOLUME
command.
T4: TCODE DEFAULT=EBCDIC,
TASSIGN=(3,('A',–,'I'),('J',–,'R'),('S',–,'Z')),
TASSIGN=(4,('#A',–,'#I'),('#J',–,'#R'),('#S',–,'#Z'));
Table 2-56. Summary of VOLUME command parameters
Parameter Specifies Online Offline DJDE
VOLUME BMULT Specifies a multiplication factor that is used to
determine the true block length. N Y N
VOLUME CODE Specifies the character code set for input data
translation. Y Y N
VOLUME DBCODE Specifies which double-byte character code
translation table the system will use to
interpret the input data. Y N N
VOLUME DBCS Specifies the double-byte character printing
mode. Allows printing of data streams with
intermixed single-byte and double-byte
characters. Y N N
VOLUME EMTYPE Specifies the emulation type with which the
system will print text. Y N N
VOLUME EOV Specifies the action that the system will take
when it detects the end of a tape volume. N Y N
VOLUME EXPAGE Provides data error logging and reporting of
unprintable characters that do not have font
bitmap or outline data in the font file. Y N N
VOLUME HOST Specifies the source of input data that will be
processed. Y Y N