Xerox Nuvera 100, Software Manual

Page: 106 / 498

PDL principles and procedures
1-78 Using LCDS Print Description Language
Printing highlight color applications on DP EPS
If you have a Xerox 4850, 4890, or DP92C HighLight Color Laser
Printing System, your applications probably include the use of
highlight color (one color plus black). The JDLs used to print
these applications contain commands and parameters that
specify the location and the color ink to be used. These color
JDLs may also contain commands indicating what the system
should do if a JDL specifies a different color ink from what is
loaded in the printer.
The DP EPS can print jobs that were designed for the 4850,
4890, or DP92C LPS and contain color commands. When you
run a highlight color job on the DP EPS, the job prints in black
ink. (Some solid colored or shaded areas may print in various
shades of gray.)
The following table lists the highlight color related PDL
commands, parameters, and DJDEs.
Table 1-15. Highlight color commands
Command Color parameter
DJDE
available?
ABNORMAL IMISMATCH No
ISUBSTITUTE No
CME INKS No
IDR ICATALOG Yes
ILIST Yes
PALETTES Yes
LINE INKINDEX Yes
LMODIFY INK No
SELECT No
TEST No
OUTPUT FORMS Yes
GRAPHICS Yes
IDFAULT Yes
IDR Yes
IRESULT Yes