manualshive.com logo in svg

Xerox Nuvera 100, Software Manual

Share
Download
Xerox Nuvera 100 Software Manual Download Page 414

Using Dynamic Job Descriptor Entries (DJDEs)

5-62

Using LCDS Print Description Language

Options

RFORM DJDE: points to note

•

The RFORM parameter is not allowed in a ROUTE command 
that is being defined as a catalogued file. However, you may 
specify it in the ROUTE command in the JSL invoking the 
catalogued RTEXT file, or you can specify it via the RFORM 
DJDE. (Refer to the ROUTE RTEXT parameter description in 
the “Specifying print format parameters” chapter, for further 
details.)

•

Forms may be created using forms creation software on a 
workstation, or by compiling a file of forms source 
commands, called an FSL, with the FDL compiler on another 
type of LPS. 

•

For colored forms:  If an inkref that is on the ink list is 
omitted from the command, commas must be used to 
maintain the relative positioning of the remaining ink 
references.

If more than two inkrefs are specified, the system ignores the 
additional inkrefs.

RTEXT DJDE 

Specifies text to be printed on a separate page preceding a 
report. It takes effect on the next page boundary. 

The parameters for the RTEXT DJDE are the same as for the 
ROUTE RTEXT command. 

Type

Page oriented

Table 5-51. RFORM DJDE options and definitions

Option

Definition

formid

form identifier.
Name of the form to be printed with all RTEXT pages. References a previously 
created form file (FILENAME.FRM). 

NONE

Specifies that no form will be printed with RTEXT pages.

INKS

Specifies that the inks that follow will be used for the forms.

inkref

Identifies the inks that override the corresponding inks that are specified in the 
ink list of the form. If a form does not contain an ink list, the form is printed in 
black.

Summary of Contents for Nuvera 100



















































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands