Specifying print format parameters
Using LCDS Print Description Language
4-51
OUTPUT DENSITY
Specifies how the system will respond to a scan line density
error.
This parameter is obsolete and is listed for compatibility
purposes only. It is, however, recognized by the XJDC (PDL)
compiler. You would use it if your JSL will be used for printing on
a system that is running an early version of operating system
software.
Syntax
OUTPUT DENSITY = {FIX | NOFIX | DEFAULT}
Options
Default
DEFAULT
OUTPUT DESTINATION
Specifies the destination for printed output.
Syntax
OUTPUT DESTINATION = {BIN | TRAY | EXPORT}
Table 4-49. OUTPUT DENSITY parameter options and definitions
Option
Definition
FIX
Enables local density function.
NOFIX
Disables local density function.
DEFAULT
Directs the output to respond to local density events according to the default for
the printer type.
Summary of Contents for Nuvera 100
