Xerox Nuvera 100, Software Manual

Page: 153 / 498

Specifying input parameters
Using LCDS Print Description Language 2-45
SEFFNT command parameters
The following table summarizes the use of the SEFFNT
command parameters.
The following sections describe the syntax of the command
parameters and give explanations of the parameter options.
SEFFNT SEFMAP
Specifies font mapping, which associates one font with another
font. A collection of font mappings may be stored in a mapping
file. (Font files are files having the .FNT extension and are stored
on disk.)
Syntax [label:] SEFFNT SEFMAP = {((font
1
, font
2
) [, (font
m
, font
n
)]) |
NONE}
Options
Table 2-48. Summary of SEFFNT command parameters
Parameter Specifies Online Offline DJDE
label Specifies the name of the font mapping file or the
identifier of a font mapping table that will be created. If
the label does not exist, the SEFFNT command either
creates a table in the JDL or uses an existing mapping
file if MAP is specified. Y Y N
SEFFNT SEFMAP Specifies font mapping where the second specified
font is the SEF mapping for the first font. Y Y Y
SEFFNT MAP Specifies a font mapping that was defined previously. Y Y Y
Table 2-49. SEFFNT SEFMAP parameter options and definitions
Option Definition
(font
1
, font
2
) Font pair, where font
2
is the SEF mapping for font
1
.
(font
m
, font
n
) Font pair, where font
n
is the SEF mapping for font
m
NONE Disables font mapping and short edge feeding (SEF); stops previous SEFFNT.
UPD UPDATE
Indicates that the specified font pairs change existing font mappings or
appending new mappings to the current font mapping table.